Carbon Black Raymond Mill Advantages

Carbon black Raymond mill can be used in 50-450 mesh carbon black powder processing, the advantages of the YGM carbon black Raymond mill:

1.Unique wear proof perching knife design
The combined-type shovel blade can reduce the cost of wearing parts, with only the blade to be replaced during maintenance; the design of its curved shovel blades can change the feeding angle and prolong the service life of the roller and ring, up to reduce the operating costs.

2.Arc air duct design
The circular duct can avoid air energy loss and ensure the transportation efficiency; the high-strength guard plate can protect the working face of the air duct.

3.Cone Gear Whole Transmission
The bevel gear integral transmission can achieve higher transmission efficiency, save the space and lower the investment costs.

4.Volute design
The unobstructed wear-resistant volute can effectively improve the efficiency of the wind-driven transmission in the mill and simultaneously reduce the costs for material maintenance.

Carbon Black Raymond Mill for Powder Processing

Carbon black is the most widely used and cost effective rubber reinforcing agent in tire components (such as treads, sidewalls and inner liners), in mechanical rubber goods, including industrial rubber goods, membrane roofing, automotive rubber parts (such as sealing systems, hoses and anti-vibration parts) and in general rubber goods (such as hoses, belts, gaskets and seals).

Besides rubber reinforcement, carbon black is used as black pigment and as an additive to enhance material performance, including conductivity, viscosity, static charge control and UV protection. This type of carbon black is used in a variety of applications in the coatings, polymers and printing industries, as well as in various other special applications.

Carbon Black Raymond Mill Working Principle

The standard configuration of carbon black Raymond mill consists of main unit, reducer, powder classifier, cyclone powder collector, dust cleaner, blower, control cabinet motor and pipes. The optional accessories include crusher, bucket elevator, feeder.

1.The lump material will be conveyed into the storage bin by the bucket elevator after it is crushed into the required particle size by the jaw crusher.

2.Then electro vibrating feeder will uniformly transfer the material into the grinding chamber of the host machine.

3.The material is up thrown and fed into the space between the grinding roller and grinding ring in the process of synchronous rotation of the shovel and the grinding roller, and forms a cushion material layer.

4.The material on this layer is grinded between the grinding roller and the grinding ring. Thus, the purpose of powder production is achieved.

5.The grinded powder will be carried by the airflow of the fan into the analyzer for classification.

6.The powder with the qualified fineness will enter the large cyclone collector, together with the airflow through the pipes, for classification, and then, will be discharged by the discharging device, as the finished product.

7.The airflow is sucked into the air blower through the air return pipe on the upper part of the large cyclone collector.

8.The unqualified powder will be thrown to the external wall by the airflow and separated from the airflow.

9.The coarse powder will fall into the grinding chamber for regrinding due to its own gravity.

10.The whole airflow system is closed and cyclic, and it flows under the positive and negative pressure circularly.