-
Introduction of YGM Raymond Mill
Clirik YGM Raymond Mill is suitable for grinding of all kinds of materials whose Moh’s hardness is below 9.3, such gypsum, dolomite, calcite, calcium carbonate, limestone, kaolin, bentonite, marble, quartz, feldspar, barite, clay, talc, fluorite, clay, white mud, refractory material, glass, total about 300 kinds of materials.
Technology Parameter of YGM Raymond Mill
Model Roller Ring Feeding
Size
(mm)Finished
Size
(mm)Mill
System
Power
(KW)Capacity
(t/h)Overall
Dimension
(mm)Quantity
(piece)Diameter
(mm)Height
(mm)Inner
Diameter
(mm)Height
(mm)YGM7815 3 260 150 780 150 15 0.613-0.033 35.7 1-3 4300*3500*5100 YGM9517 4 310 170 950 170 25 0.613-0.033 72.65 2.1-5.6 7100*5900*7900 YGM1280 3 370 240 1170 240 20 0.613-0.033 145.15 4.5-12 9300*5600*8200 YGM1300 4 410 280 1270 280 20 0.613-0.033 202.15 6.5-16 9100*8200*8400 YGM1620 4 450 300 1500 300 20 0.613-0.033 322.2 8-20 12500*5700*10500 YGM1720 4 510 300 1720 300 35 0.613-0.033 450 10.5-28 11550*9500*10500 Note: This specification is just referencing, any changes are subject to the products.
Working Principle of YGM Raymond Mill
Big materials are crushed by jaw crusher to the required particle sizes, and carried by bucket elevator to the storage hopper, and are fed evenly and continuously by vibrating feeder into the main unit for grinding. The grinded powder are carried by the airflow from the blower to the classifier to be classified, the particles which meet the fineness enter cyclone collector through pipe, and are separated and collected there. They are discharged at the discharging valve to become finished products; The airflow is sucked to the blower by return pipe on the top of cyclone collector. The whole airflow system is a sealed circulation, and is circulated under positive and negative air pressure.
Advantages of YGM Raymond mill
1.Compared with the ball mill, the Raymond mill has higher efficiency, lower power consumption, smaller covered area, less investment;
2.The grinding roller compressed on the grinding ring tightly due to the centrifugal force;
3.The output and fineness of the finished product will not be affected when the grinding ring is worn to a certain degree;
4.The grinding roller and the grinding ring have a long replacement period, so it gets rid of the shortcoming that the wear parts of centrifugal mills have a short replacement period;
5.The classifying airflow of the Raymond roller mill flows according to the recycling process as: the fan mill shell cyclone separator the fan;
6.Compared with the high speed centrifugal grinder, there is less powder dust, and the operation room is clean without any pollution.
