YGM series high-pressure Raymond crusher also name YGM high pressure grinding mill,YGM Raymond mill. YGM series high pressure Raymond crusher is used to make 30-400 mesh stone powder. Due to its high economic performance, it is one of the best-selling models of CLIRIKE Machinery.

Many customers have asked questions about the YGM high-pressure Raymond crusher. In this article, we will answer seven questions about YGM high-pressure crushers as follows:

1. Why is this machine called YGM high pressure Raymond crusher? What is the difference between him and Raymond Mill?

2. What kinds of materials can the YGM series high pressure Raymond crusher process?

3. What are the supply moisture requirements for the YGM high pressure Raymond crusher?

4. What are the supply size requirements for the YGM high pressure Raymond crusher?

5. How much fine powder can the YGM high pressure grinder produce? What is the way out?

6. Are YGM high pressure Raymond crusher machines and accessories durable?

7. Is the YGM high pressure Raymond crusher noisy? Is it ecological?

1. Why is this machine called YGM high pressure Raymond crusher? What is the difference between it and Raymond Mill?

YGM series high pressure Raymond crusher has been upgraded from traditional Raymond mill.

Raymond Mill has been around the world for over 100 years and was first manufactured by C.V. Grueber in Berlin, Germany.

Finally, years later, people in many countries are trying to improve this machine. And finally, there are various names like VR Mill, YGM, MTM, MTW, this kind of series, etc.

However, CLIRIK Machinery called this machine YGM. This is because YGM was the first name to start making this machine.

Powder Making Machine YGM high pressure Raymond crusher

High pressure refers to the high pressure spring in the YGM high pressure Raymond crusher.

The roller hanger is secured by a high pressure spring with a pressure of 1000-1500 kg. After starting work, the grinding roller rotates around the shaft and rolls against the grinding ring due to the action of high pressure springs and centrifugal force. The rolling pressure is 1.2 times higher than that of the Raymond mill under the same production conditions, which translates into a significant increase in production.

2. What kinds of materials can the YGM series high pressure Raymond crusher process?

YGM Raymond crusher is suitable for stone types with hardness less than 9 such as bauxite, manganese, iron oxide, barite, calcite, potassium feldspar, talc, marble, limestone, dolomite, zeolite and fluorite, and so on.

3. What are the supply moisture requirements for the YGM high pressure Raymond crusher?

For the feed water, it is recommended that the feed water be less than 6%.

Humidity generally affects the running current of the mill, so the less water there is, the greater the capacity.

However, there is not a big difference in capacity, even if the feed water content is 1%, 3% or more.

4. What are the supply size requirements for the YGM high pressure Raymond crusher?

It depends on the material. When feeding hard materials, we recommend a feed size of less than 15mm.

After many experiments, 5-15mm is the optimal feed size.

When supplying soft materials such as calcium carbonate and making these types of materials with barite, supply sizes slightly less than 20mm are fine.

All feed sizes cannot be less than 1mm. That is, you cannot supply dust or all sand to this machine.

There are two reasons.

First, if you feed the machine with too small a material, the material will not grip between the rollers and the ring and you will not be able to crush or impact the material.

The second reason is that the vibration of the machine becomes very large and the machine is damaged.

At the same time, it is not possible to feed oversized materials like all material sizes above 20mm. Also, I do not recommend it.

If the material is too large, the rollers and rings of the machine, as well as the internal crushing chamber, can easily become blocked.

5. How much fine powder can the YGM high pressure Raymond crusher produce? What is the way out?

Outlet Size This YGM Raymond crusher can produce sizes from 33 microns to 613 microns (30-400 mesh). It can be adjusted within this range.

In fact, a traditional Raymond mill cannot produce this fine 33 micron size, but the YGM mill uses a new turbo type classifier for this machine so it can separate 33 micron sizes. This is around 400 meshes. With an approval rate of 90% or more. Also, if you want to make a very thick size, such as a 600 micron size, you can reduce the running speed of the classifier, increase the air capacity of the blower to increase capacity, or make the size significantly thicker. that.

6. Are YGM high pressure Raymond crusher machines and accessories durable?

Service life and spare parts Many customers have also inquired about the service life of YGM Raymond crusher and spare parts.

In the case of YGM Raymond mills, this machine is usually easy to work for about 10-15 years, but frequent grinding of hard materials will shorten its service life.

The same principle applies to spare parts, and if you grind a soft material, the life will be longer, but if you use a hard material, the life will be shorter.

7. Is the YGM high pressure Raymond crusher noisy? Is it ecological?

Due to strict environmental policies in the region, many customers were concerned about noise and dust.

Let's take a look at the noise from this machine. For example, when the machine is running, we are standing close to the machine at 1 meter, so the sound is less than 90 dB.

Also, if the distance is about 10 meters, you can control the sound less than 75 dB.

In fact, this noise intensity is easily accepted in many developed countries. So the noise is fine.

About dust. Consider the question of where the dust comes from?

First, from the crushing parts, sending the stone to the hammer crusher/jaw crusher produces dust.

Then the parts supplied from the vibratory feeder to the hammer crusher/jaw crusher are also dusty.

After that, there is also dust at the entrance of the silo.

Finally packing process. These four parts are completely.

In fact, in the case of a shredder, the dust does not come out. This is because the entire router system is closed.

The entire production line is a system that works closely together, with negative and positive pressures.

Air flows from the supply parts into the mill, then back to the cyclone collector, blower, and then to the mill.

You will discover that it is a circulatory system. The air is recycled in the system.

We already know that dust comes out of only those four parts.

So if you want to solve the dust problem, you can choose a high setting with a good bag filter system. So that all the dust is collected and your factory can be kept very clean.

YGM high pressure Raymond crusher supplier

Shanghai CLIRIK Machinery Co.,Ltd. is a professional manufacturer of stone powder grinding mills. Since its establishment, CLIRIK has been committed to the research and development of mining equipment. The quality of the equipment produced is excellent. Especially the marble mills produced have a very high market share and have won unanimous praise from marble investors.

In addition, CLIRIK also provides customers with high-standard service levels. From pre-sales, during-sales to after-sales, professional personnel are available to serve them, and they can tailor-made marble milling equipment for customers, which fully meets customer requirements. need. Our company has 24 hours a day toll free number. If you have any other questions, you can call for consultation and someone will answer it for you.

Email: [email protected]

WhatsApp: +8613512155195/+8613917147829