Bentonite ore is a kind of mineral with multiple uses. Its quality and application fields mainly depend on the content and attribute type of montmorillonite and its crystal chemical characteristics. Therefore, its development and utilization must vary from mine to mine and from role to role. Such as the production of activated clay, calcium base to sodium base, drilling grouting for stone drilling, instead of starch used for spinning, printing and dyeing slurry, interior and exterior wall coatings for building materials, preparation of organic bentonite, synthesis of 4A zeolite with bentonite, production White carbon black and so on.

First of all, for the grinding mill, the hardness of different materials will also relatively affect the efficiency of the grinding mill. At the same time, for the grinding mill, the roller ring is one of its important configurations, which is also the crushed material. The difference of this configuration makes the grinding power different. Therefore, the profit that can be brought to customers in production is different. Of course, for the same type of grinding mill, in production, the grinding roller The performance of the grinding ring is not static. As the production progresses, the two will be worn and the performance will decline. Therefore, the benefits that can be brought to the production will decrease. At this time, it is necessary to promptly deal with the damaged grinding The roller grinding ring is repaired or maintained to ensure the normal performance of its performance, so as to ensure the efficiency of equipment production.

There is also the fan is another configuration inside the grinding mill. The fan is an important accessory that affects the output and the fineness of the finished product. Therefore, in the production, the choice of the fan and how to maintain the fan determine the results of the production. , Especially for the wear of the fan blades, it needs to be treated in time, and the powder particles attached to the surface of the blades should be cleaned. Pay attention to check whether the blades are clean in daily operations and remove the powder on the blades in time. These are to ensure the normal operation of the fan. Important conditions: the internal configuration of the powder grinding mill also has a powder collector. If there is a problem with the sealing of the powder collector, air leakage will occur, which will cause the finished material to be sucked back and cannot be collected normally. Will affect the efficiency of production. Therefore, whether the bentonite grinding mill is suitable or not depends on how to use the equipment reasonably. For specific conditions, you can call +8618001642498(whatsapp&wechat) for consultation.