Brief Introduction:
Sand washer is used for removing dust in sand. It aims at improving the quality of sand. It is especially applicable to wash construction sand and paving sand. Sand washing machine is widely used for cleaning materials in the following industries: quarry, minerals, building materials, transportation, chemical industry, water conservation and hydropower, cement mixture station and so on.
Working Principle
The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.
Specifications
Specification
|
XS2200
|
XS2600
|
XS2900
|
XS3500
|
Wheel bucket diameter(mm)
|
2200
|
2600
|
2900
|
3500
|
Rotation speed(r/min)
|
1-2
|
1-2
|
0.8-1.5
|
0.8-1.2
|
Processing capacity(t/h)
|
15-30
|
20-50
|
50-100
|
120-200
|
Motor power(kw)
|
4
|
5.5
|
7.5
|
11
|
Total weight(kg)
|
4300
|
5600
|
8100
|
9900
|
Dimensions (L*W*H) (mm)
|
3150*1910*2280
|
3520*2390*2690
|
3820*2640*3200
|
4420*2930*3800
|
Note: This specification is just referencing, any changes are subject to the products.