Brief Introduction:

1. Processing ability: 0.2-45 t/h

Feeding size: ≤15-≤25mm

Product Fineness:325-3000Mesh

2. If you need lower fineness of final product, you can choose Raymond Mill

3. Range of application:Calcium carbonate, barite, dolomite, calcite, limestone, kaolin, bentonite, marble, gypsum, quartz, feldspar, clay, talc, fluorite, clay, white mud, mica, refractory material, glass, total about 1000 kinds of materials.

Working Principle

The grinding disc is driving by motor through reducer. The material falls to grinding disc from the feed opening. The materials are driven to the edge of disc by the centrifugal force and crushed into fine powders by rollers. Then, the hot air from the nozzle take the fine powder to high effiency classsifer.The qualified powder are taken by the air to the powder collector to be collected, while the unqualified powder are sent back for regrinding.

Advantages

1.High grinding efficiency: save 20~30% power consumption compared with the ball mill.

2.Strong drying capacity: dry and grind raw materials with moisture content as much as 15%.

3. Mutifunction: crushing, drying, grinding, separating and conveying.

4. Low noises and little dust: no direct contact between the grinding rollers and grinding disc, so metallic impact is avoided and its noises is 20~25 decibels lower. Totally closed negative pressure operation has employed by this vertical grinding mill, so there is little dust during the operation.

5. Low wear rate and little metallic pollution: its metal wear is only 5~10g/t.

Technical Data